Article number: 341020
JOBO ST50 is a stroke feeder developed for economical production in first thinnings and energy wood harvesting.
The harvester falls, twigs and cuts. Reliability and good delimbing result are basic but simplicity and low weight are major targets. The use of high tensile strength materials gives the possibility to gain low weight so that the harvester head can be attached to small tractors or excavators.
On the control unit, you select type of tree (SET 1 to SET 6) and length (six different lengths/tree stroke).
Selected length and measured length are indicated as well as production and total driving time. It has four driving programs (selected with F1-F4), for Combi driving with stroke and roller, only roller, MultiStem and MultiGrip for heavier wood.
The model has inductive sensors with an accuracy of 2,5 cm and reads feed in the front.
All functions of the unit can be controlled by two boxes located close to the crane control unit.
Where the terrain allows, the harvester can advantageously be mounted on excavators (5-9 ton).
For assembly, the bucket is usually replaced with a boom extension that can be fixed or hydraulically projected.
Excavators usually have enough oil flow and additional hydraulics that can be used.
With this small harvester, the production can be raised to a professional level. Despite the lower speed, the smooth combination reaches 4-6 m3 of production in typical thinnings.
Technical specifications:
Delimbing: 3-25 cm
Felling max: 30 cm
Feed speed: 0,5-1 m/s
Stroke length: 50 cm
Delimbing force: 22 kN
Variable knives: 3 pcs
Oil needs: 30-60 l/h
Recommended pressure: 160-190 bar
Weight, including oil: 210 kg
Weight with Rollerfeed Combi: 290 kg
Guide bars: Standard 14”, 0.404 1,6 mm (alt. 16”, 0.404, 2,0 mm)
Connections:
Pressure 3/4" (system center closed)
Return 3/4”
The tilt of the unit is done with external connection, normally grip function.
This product contains:
JOBO Stroke feeder ST50
Control system Jobo CAN CCD with 3.2" color display
Connecting cable: 3,5 m
Control cable: 10 m
Model Jobo:
- Can be supplemented with measuring roller, also measuring back feed
- Can be supplemented with diameter measurement
- Is prepared for stub treatment with eg. Urea
- Can be supplemented with Jobo MID CCD, 7” color display
In the case of a fixed pump, you need a relief valve
Asseccories
Pressure- and return hoses
Rollerfeed Combi
Grapple loader, three point stand with hydraulic system