Article number: 82211
Included in this article: transmitter
The transmitter and receiver are programmed at delivery. If new programming is required, follow this instruction:
1. Press the function key No. 3 on the receiver (picture nr 2) of at least 0.3 sec, max 4 sec. (Allow approximately one second between key presses). Red LED, No. 6, lit ready for programming.
2. Press the select button No. 4 for at least 0.3 sec max 4 sec. Red LED lights up the relay.
3. Press the Select button No. 4 once again, just as long.
4. At last, press the transmitter button until the red LED No. 6 flashes 3 times. The programming is completed.